FLAMINGO DESIGNS HELP CENTER

.

.

.

.

.

.

.

We apologize for the inconvenience, but we do not accept cancellations due to customer reasons such as ordering mistakes or different from the image.

.

.

.

.

215 +/- 10 Microns.

16 to 28 degrees Celsius (wet applications are not needed nor recommended due to Comply™ Adhesive).

Product applied to aluminum plate and exposed to 7000 cycles using a Taber Abrader with a 1 kg load. Test Result: no change to pattern.

Aluminum, steel, varnished metal bases, plastics, laminates, walls, plasterboard, civil plaster etc.

Expected Performance Life is 12 years for indoor

Residentials, hotels, restaurants, offices, lobbies, elevators, washrooms, hospitals.

The PS Single Colour Series has an anti-bacterial coating, making it suitable for applications where special attention to hygiene is required i.e. dental offices or hospitals.

Easy clean with standard detergents and water / wet cloth

CAN/ULC-S102.2, ASTM E162, ASTM E662 Class A levels as defined in NFPA 101 "Life Safety Code" Test Method: ASTM E84.

product applied to aluminum plate and subjected to a temperature of 40 degrees Celsius at a relative humidity of 90% for 28 days. Test Result: minimal change to film adhesion and appearance.

Comply™ technology for quick and easy application. The air between the film and surface is released via air channels. Anti-bacterial protection is built into the PS Single Colour Family.

Product applied to aluminum plate and subjected to a temperature of 65 degrees Celsius for 28 days. Test Result: minimal change to film adhesion and appearance.